Food-Grade Silicone Bellows

Platinum-cured food-grade silicone bellows for filling, dairy and beverage lines — translucent or white, CIP/SIP capable, compliance documentation on request.

Food-grade silicone bellows sit where the product itself passes through, so the material question is not only temperature but what the compound can release. We mold platinum-cured silicone: the catalyst leaves no peroxide byproducts, the finished part is odourless and tasteless, and translucent grades let operators see flow and catch a blockage before the line overpressures.

Why Platinum-Cured Silicone

Peroxide-cured silicone can leave volatile byproducts that need a post-cure to clear; platinum addition cure does not. For a bellows on a filling nozzle or a dairy valve, that difference is the whole argument, and it is why food and medical programs specify platinum cure rather than the cheapest silicone available.

Compliance is documented, not assumed. Grades meeting FDA 21 CFR 177.2600 and EU 10/2011 are available on request, with the supporting reports for your file — ask for them at quotation stage rather than after the parts ship.

Where Food-Grade Bellows Fit

- Filling and dosing nozzles: flexible connection between valve and container - Dairy and beverage valves: movement absorption on CIP/SIP lines - Food pumps and homogenizers: vibration isolation in product contact - Packaging machines: covers over product-contact mechanisms - Pharmaceutical and cosmetic filling: where extractables matter

Temperature and Cleaning

Silicone runs from -60°C to 230°C, so the same bellows survives steam and hot-water cleaning cycles as well as chilled product. Confirm the cleaning agents with us: caustic and acid CIP chemicals are the usual failure path for any elastomer, and the concentration and contact time decide the service life.

What to Send for a Quotation

- Product-contact dimensions: bore, length, end connections - Temperature range, including CIP/SIP peaks - Cleaning agents and concentration - Documentation needed: FDA, EU 10/2011, material certificates, first-article report - Whether translucency or a colour code is required

Tooling quotes in 7 days, quotations in 24 hours, samples in 7-12 working days.

FAQ

Is your food-grade silicone FDA compliant?

Grades meeting FDA 21 CFR 177.2600 and EU 10/2011 are available on request, and we supply the supporting documentation with the order. Tell us the market you ship to so the right grade and paperwork are quoted.

Can the bellows be steam sterilized?

The silicone body takes steam at the temperatures used for SIP, and the bellows is molded as one seamless wall so there is no joint to trap product. We confirm the cycle conditions against the compound we quote.

Why translucent instead of white?

Translucent silicone lets an operator see flow, foam or a blockage through the wall. White is chosen where light must be excluded or where a colour code identifies a line.

Other Shapes We Mold

Need parts in this category?

Send your drawing, sample or spec — engineers reply within 1 business day with tooling and unit-cost direction.