Hexagonal Rubber Bellows

Hexagonal molded bellows with flat faces that clamp cleanly and resist rotation — shaft, screw and robotic-joint protection in tight envelopes, molded to drawing in EPDM, NBR or silicone.

A hexagonal bellows is a convoluted sleeve with six flat faces instead of a round wall. Those flats give clamps and collars a positive grip, and they resist twisting better than a round convolution — which is why hexagonal bellows show up around rotating shafts, lead screws and robot joints where a round boot would walk or rotate under torque.

What the Flat Faces Change

Every convolution flexes along the flats, so the fold line is controlled instead of free to migrate. That makes the molded hexagon more torsionally stable than the round equivalent, at the cost of some angular range: a hexagon takes less side-to-side deflection per convolution than a true circle, so the installed length has to be longer for the same lateral offset.

The flats also matter in assembly. A hexagon seats against a hex nut or a machined flat on the housing, and it seals without a separate adaptor ring — useful where a round clamp would need a collar welded on.

Where Hexagonal Bellows Fit

- Rotating shafts and spindles: dust and coolant protection that does not spin off - Lead screws and jack shafts: telescoping covers with clamped ends - Robot wrists and linear actuators: compact joint boots - Valve stems and tie rods: weather and grit exclusion - Retrofit covers over an existing hex housing

Material Choice

EPDM handles washdown and weathering, NBR keeps oil mist and hydraulic fluid out, neoprene takes ozone and refrigerants, and silicone covers -60°C to 230°C where heat or food contact rules out the others. All compounds are RoHS and REACH compliant, and food-grade compounds are available on request.

What to Send for a Quotation

- Across-flats and across-corners dimensions, plus overall length - Stroke or travel the boot has to follow - Rotation speed and torque, if the shaft turns - Media it must keep out: dust, chips, coolant, washdown, UV - Attachment: clamp, collar, adhesive or molded-in flange

Tooling is quoted in 7 days, quotations within 24 hours, samples in 7-12 working days with tooling fees refunded after the agreed volume.

FAQ

Why use a hexagonal bellows instead of a round one?

For grip and torsion. If the boot is clamped to a hex housing, or if the shaft rotates and a round boot tends to creep, the flat faces hold position and take the twist without a separate adaptor.

Does a hexagon reduce movement capacity?

Yes, per convolution. The flats flex less freely than a circular wall, so for the same lateral offset a hexagonal bellows needs more convolutions or a longer body. Send the movement and we size accordingly.

Can the hexagon be molded in silicone?

Yes. Silicone is common where the shaft runs hot or the boot sits near food or medical equipment; EPDM and NBR remain the cheaper choice for washdown and oil service.

Other Shapes We Mold

Need parts in this category?

Send your drawing, sample or spec — engineers reply within 1 business day with tooling and unit-cost direction.