Custom EPDM parts molded and extruded for outdoor, water and steam duty: -50 °C to 150 °C, Shore A 30-90, weatherstrip, gaskets, hose and bellows.
Ethylene propylene diene monomer gets specified for one reason: it is the compound that stays intact outdoors. The saturated backbone resists ozone and UV without the protective waxes that other rubbers need, so a part left in sun and rain for years does not check, crack or go brittle.
What This Compound Handles
Weather, ozone, UV, water and steam, from −50 °C to 150 °C continuous. Washdown equipment, rooftop enclosures, steam lines and outdoor cabinets are the usual applications, and in each case the part is doing the same job: keeping water out or keeping a flexible joint flexible while the weather tries to age it.
Mineral oil is the limit. EPDM swells in hydrocarbon oil, grease and fuel, so a part that sees either should be specified in NBR, which handles mineral oil and grease to 120 °C, or in FKM for fuel and chemical service to 200 °C. Where one assembly sees both weather and oil, the practical answer is two parts in two materials rather than one compromise compound.
Where We Mold It
Extrusion carries most of the linear work: weatherstrip, seals and strips, rubber hose and edge trim, run in continuous lengths and cut to size. Compression and transfer molding cover the shaped parts, including gaskets, bellows, cable grommets and rubber mounts. Die-cutting covers flat gaskets and pads from sheet.
Because tooling is built in house, a profile change on an extruded strip and a cavity revision on a molded part are handled by the same team. Ten compression presses run alongside the extrusion lines in a 7,000 m² plant, and every part is given a 100% visual inspection before packing.
Hardness, Colour and Compliance
Shore A 30 to 90. Black is the standard color for weatherstrip and hose, and it is what most outdoor parts ship in because carbon black is part of the weathering package. Other colors are matched to a Pantone reference or to a physical sample, which matters when the strip is visible on a finished assembly.
Laser marking is available for part numbers, lot codes and cut lengths. The plant is ISO 9001, ISO 14001 and IATF 16949 certified. RoHS and REACH declarations are issued on request for the specific compound and color, and we will name the compound on the declaration rather than the generic material family.
What to Send for a Quote
A 2D drawing with the critical dimensions, or a 3D STEP or IGES model for a molded part. For extruded profiles, a section drawing with the cut length and the packing method is enough to quote. Include the compound and hardness, the annual volume in meters or pieces, and a target price if you have one. If the part follows a standard such as AS568 or ISO 3601, send the standard number and the size designation.
Tooling is quoted within 7 days and first samples follow in 7–12 working days. We return the quote within one business day of receiving the drawing. Mold cost and MOQ are returned on volume, so tell us the annual figure even if the first order is small.